Motivasi Untuk Korang Semua

Hye2.. SeLaMaT TaHuN BaRu CiNa uNtUk KaUm CiNa & SeLaMaT BeRCuTi PaDa SeMuA YaNg BeRcUtI... Untuk aku & korang yang Wajib kene keje SeLaMaT BeRtUgAs .. Seronok masa cuti boleh pegi melancong dan balik kampung. Rindunya waktu zaman belajar..

Lupakan semua tu yang penting kene pandang kehadapan. Mari layan motivasi yang diberi cikgu kepada pelajarnya berdasarkan cerita..

Seorang guru memegang segelas air dan bertanya kepada anak muridnya. “Berapa beratkah air ni?”

“10 ml!” “15ml!”, “50ml!” “100ml!” Murid-murid menjawab.

Bagus! tetapi saya sendiri tidak pasti berapa berat air ni kerana saya tidak menimbangnya. Ok bagaimana kalau saya memegang gelas ini selama seminit?
“Tiada apa-apa!” Murid menjawab

Kalau saya memegang selama setengah jam?
“Tangan lenguh!” Murid menjawab,

Ok adakah berat gelas ini berubah, bertambah berat misalnya?
“Tidak!” murid menjawab.

Ok bagaimana pula kalau saya memegang setengah hari?
“Tangan cikgu boleh kebas dan kena hantar ke hospital kerana lumpuh”, salah seorang murid menjawab diikuti dengan gelak ketawa satu kelas.

Guru tersenyum, “Bagus! Hmm bagaimana pula kalau saya pegang cawan ni satu hari? dua hari? seminggu? setahun?”
Murid-murid mula pening, gilo ker ape Cikgu ni?

Ok kalau macam tu bagaimana nak mengelakkan saya dimasukkan ke hospital?
“Lepaskan sahaja gelas itu!”

Ya , itulah jawapan yang saya cari. Begitulah ibarat dengan masalah yang kita hadapi. Kita masih bertahan jika kita menanggung beban satu masalah itu dalam masa yang singkat tetapi kalau masalah itu dibawa ke satu masa yang lama, ia akan menjadi berat walau pun sebenarnya beratnya adalah sama.

Jadi setiap masalah yang kita hadapi tu janganlah dibawa, segala masalah hendaklah diselesaikan atau dilupakan selewat-lewatnya sebelum kita tidur supaya masalah itu tidak menghantui kita keesokan harinya. Jadi pada setiap pagi kita bangun otak kita jadi "fresh" dan bersedia menghadapi hari baru dengan lebih ceria dan penuh semangat.

Ini dapat mengelakkan stress dan kemurungan yang silap-silap boleh menyebabkan kita ke hospital sakit jiwa

Ingat…

“Lepaskan sahaja gelas itu!”

P/S:“Lepaskan sahaja gelas itu!” ( Jangan Bebankan Diri dengan menyimpan masalah, Selesaikan atau lupakan sahaja Beban yang dihadapi)

Learn How to Create Liquid Plastic Effect

In this tutorial i will teach how you can create in a few steps the effect of liquid plastic on Photoshop.

Final Image Preview

Resources

• Mouse Photo

Step 1

Open file. First thing which you need to do is to unlock the background layer. To do this, double click on the “Background” layer and name it “Mouse”. Move layer a little bit upper, then create new layer under “Mouse” layer named “Background” and fill it with white color

Step 2

Now get color sample from the bottom part of mouse by using Eyedropper Tool. I got color #c3bea3.

Step 3

Select the Pen Tool (Shape layers mode) and try to create shape of falling droplets somewhere on the bottom part of mouse using the same color as we selected before.

Step 4

When our shape is done, just rasterize it with Layer > Rasterize > Shape. Then select the Burn Tool (Brush: 20px, Range: Highlights, Exposure: 40%) and make bottom parts of run a little bit darken.

Step 5

After that select the Dodge Tool (Brush: 25px, Range: Midtones, Exposure: 35%) and make small dodge work in places where the light should fall.

Step 6

Go to Layer > Layer Style and apply the following layer styles to this layer:

You should get this effect:

Step 7

Create a new layer above and merge it with previous to get all the effects in one layer. After that select the Eraser Tool and soft round brush about 50 pixels to remove visible border between current layer and mouse.

Step 8

Then select the Dodge Tool (Brush: 60px, Range: Midtones, Exposure: 10%) to remove color difference between keyboard layer and run layer.

Step 9

As we can see, keyboard surface has some noise on the surface. It means that we have to add the same texture to the run surface. Select this layer with Select > Load Selection, then create new layer and fill it with black color.

Step 10

After that remove selection with Ctrl+D and apply Filter > Noise > Add Noise with similar settings to these:

Step 11

Change layer mode to Screen and you will get the next result:

Final Image

This tutorial is now complete. Hope you liked it!

Creating Fashion Contrast Photo Effect

In this easy, step-by-step tutorial I´m going to show you how to create fashion contrast photo effect in a few minutes. This tutorial will be useful for designers who are doing professional fashion photo editing.

Final Image Preview

Resources

• Friends Photo

Step 1

Start by finding a photo that you can demonstrate the effect or you can use the one i will use. Open photo in Photoshop and resize it by going to Image > Image Size (Width 1000 px, Height 667 px). Layer name is

Step 2

I´m going to use filters to remove small shortcomings quickly without basic retouching. Apply Filter > Blur > Smart Blur with following settings:

Step 3

Then i would like to increase sharpness and brightness a little bit by using Filter > Sharpen > Smart Sharpen.

Step 4

Duplicate current layer with photo by using Ctrl+J and apply Image > Adjustments > Channel Mixer with similar settings to these:

Step 5

Change layer mode to Color Burn for this layer.

Step 6

Now we have two layers: one original layer on the bottom and one copied modified layer on top. Go to lower original layer and duplicate it again with Ctrl+J. Move it above all the layers on Layers palette and apply Image > Adjustments > Brightness/Contrast:

Step 7

After that change layer mode for this layer to Lighter Color:

Step 8

Now we are going to reduce saturation of the photo. Duplicate current layer again and desaturate copy with Image > Adjustments > Desaturate.

Step 9

Increase brightness with Image > Adjustments > Brightness/Contrast:

Final Image

Finally change layer mode to Screen for current layer.

Now you know how to create fashion contrast photo effect in a few minutes. Have fun trying.

Evening Eye Make Up Effect in Photoshop

Today I will show you how to imitate evening eye make up in Photoshop CS3. This lesson will be very useful to those who process the photos for fashion magazines.
So, let’s start by finding some appropriate picture of girl’s face. You can also use your own photos to experiment with, if you’re girl of course Go to Google Images and find needed photo or feel free to use mine also. Open up the photo and start to work with it.

I think it will be better to start with adding eye shadows to eyelids. Get out the Polygonal Lasso Tool and create selection similar to mine on the picture below:

Then holding Shift button and when the plus sign near cursor will appear just add second eye area selection. After that fill selected area with color of # 806475 on the new layer.

Remove selection with Ctrl+D and apply Filter > Blur > Gaussian Blur with next presets:

Change layer mode to Overlay:

To correct eye shadows borders we can apply Smudge Tool (Brush: 50 px, Mode: Normal : Strenght: 70%).

Then create a new layer and start with creating eyeliner effect. Use the Polygonal Lasso Tool again and create one more selection as on my picture below, then fill it with color of #282a37 on the new layer.

Deselect chosen area with Select > Deselect and apply Filter > Blur > Gaussian Blur with similar settings to these:

The result should be next:

After that apply Smudge Tool for this layer again.

Time to add white shining under the eyebrows. Create new layer, then select the Brush Tool and a soft round brush about 35px to color some area under eyebrows with white color.

After that apply Filter > Noise > Add Noise with similar settings to these:

Then change layer mode to Soft Light:

After that apply Blur Tool a little bit.

Ok, now make some clean work with Eraser Tool to bring shining realistic view.

Tome to color eyebrows. Create new layer, then select the Polygonal Lasso Tool again and create selected areas similar to mine and fill it with black color.

Remove selection with Ctrl+D and apply Filter > Blur > Gaussian Blur to blur current layer content about 1,5px, then reduce opacity to 40% for this layer.

And the last one thing that I would like to add is eyelashes. I’m gonna show you one interesting method how we can add it by using Pen Tool. Before we start making it, just get out the Brush Tool before and set up with the following settings for it:

Then set foreground color as black. After that select the Pen Tool (you need to make sure that you’re working with Paths instead of Shape Layers). Draw out the line using paths:

Then right-click and select Stroke Path.

A little dialog box will appear as in the screenshot. Choose Brush and make sure there is a tick next to Simulate Pressure. This is important as it will give your curve tapered ends which will make it rock!

You should get result similar to mine:

Next right click again and select Delete Path. Create more eyelashes on the same way.

Looks cool, isn’t it? Hope, you got the same good results as me, if not, just keep on training and you will good the best results! Good luck!